power brakes

[JD poly]

Has anyone converted to power brakes by adding booster and dual master cylinder with stock drums. 1966 Fury III.

 

[Ross Wooldridge]

It's not challenging - one should swap out the pedal assembly too because the leverage ratio for a manual pedal assembly is much greater, however I have heard that it's just fine using a manual pedal with a booster.

I have no personal experience with the retrofit, but everything if sourced correctly will simply bolt up.

 

[JD poly]

Thanks, would you think aftermarket or salvage yard source.

 

[Davea Lux]

Thanks, would you think aftermarket or salvage yard source.

The correct booster would be a Midland Ross unit. That is the one with the lock ring around the outside. If your salvage yard has one, grab the mounting plate and the pedal while you are at it. You can use the '67 master cylinder which will bolt on the '66 mount plate. You will also need to source the '67 distribution block and fabricate the brake lines from the master cylinder to the distribution block. You would also want to have the salvage yard booster rebuilt.

Dave

 

[mobileparts]

X 2 on what Davea ^^^ indicated ^^^ —- all of that has to be salvage yard ONLY —-
Because the ONLY thing on that list that is available N E W is the Dual Master Cylinder…..

 

[volksworld]

Stephens Performance has a Mopar salvage yard in Alabama...you may be able to source what you need there