Binky1945
Member
1973 Plymouth Fury 2, 440, four door sedan. Looks like it takes a # SMP24529DG headlight wiring harness for a # Q628TY replacement headlight switch.
Regardless of whether these numbers are correct to your files lets say that I do believe them to be correct for my purposes.
I have looked high and low for a correct specific wiring diagram and cannot find one.
I have a complete vehicle wiring schematic, but I have great difficulty following the tracings. I also have the big blue '73 Mopar book but neither have been of much help to me.
Does anyone out there have access to a specific area of the vehicle schematic that plainly shows which of these eight color coded/striped wires goes to from the switch ?
Also, which is the main (hot wire) color that feeds power to all these locations and where in the heck does it connect and draw it’s current from in the first place.
I have completely lost the use of my outer headlight sealed beams, and there seems to be an ongoing failure of sorts that is also affecting the lever controller turn signals and four-way flashers.
And yes, I will probably be replacing the turn signal harness assembly as well. I have a stock # AM-10537151 located for it. I would really appreciate a specific diagram of sorts for it as well since none of these re-suppliers include any sort of installation schematics with their products. Thank you, Jim Dent
Regardless of whether these numbers are correct to your files lets say that I do believe them to be correct for my purposes.
I have looked high and low for a correct specific wiring diagram and cannot find one.
I have a complete vehicle wiring schematic, but I have great difficulty following the tracings. I also have the big blue '73 Mopar book but neither have been of much help to me.
Does anyone out there have access to a specific area of the vehicle schematic that plainly shows which of these eight color coded/striped wires goes to from the switch ?
Also, which is the main (hot wire) color that feeds power to all these locations and where in the heck does it connect and draw it’s current from in the first place.
I have completely lost the use of my outer headlight sealed beams, and there seems to be an ongoing failure of sorts that is also affecting the lever controller turn signals and four-way flashers.
And yes, I will probably be replacing the turn signal harness assembly as well. I have a stock # AM-10537151 located for it. I would really appreciate a specific diagram of sorts for it as well since none of these re-suppliers include any sort of installation schematics with their products. Thank you, Jim Dent