What's this hole on my firewall for?

My non a.c. '67 firewall looks nothing like that.

image.jpg
 
Heater bypass valve may be the correct term, I called it a water valve.
 
Thingy - LMAO......

Fuggit. I gotta go to a car show. We'll figure it out tomorrow. Thanks for all your help.
I may have to drive down to PSL :-)
 
Hey Stan i am pretty sure i removed that from my car when stripping it, i will go find it, take some pics and let you know.
 
here is the part, it has some rust stains on it but i check and it still actuates and the rust is surface only, not eaten into the steel.
aircon water flow.jpgaircon water flow1.jpgaircon water flow2.jpg

aircon water flow.jpg


aircon water flow1.jpg


aircon water flow2.jpg
 
Yep sure, Ill find a box and pack it, then let ya know what total cost including shipping will be.
 
Capillary tube is broken on that valve.

Might not make a difference to you as you don't use the heat as often in Fla.
 
Yah when I pulled the unit out the wire was screwed to something but i cant remember what, it wasn't a coil like that and its a solid copper wire too, not a tube.
 
I checked the tip of the wire and it does not look to be broken, its a clean flat face on it, not cut either?
 
Back
Top