'65 New Yorker bringing it back to life thread-

Found some seat covers-

Light & Breezy Flat Cloth Seat Covers Rear - FH Group®

FB030burgundy013-1200x1200.jpg
 
Should match good enough-

20200326_164317.jpg


If they fit well, I will order backseat to match.

20200326_164359.jpg
 
Still gotta get a tiny bit of temporary body work done and a finish polish done, but has been washed, scrubbed and compounded. Already a big difference.
20200401_175902.jpg
20200401_175848.jpg


20200401_181524.jpg
 
Cleaned under the hood too-still a long way to go, but much better also.

20200401_181412.jpg
 
Getting closer on the cleanup, looking good in the dark-

20200402_203953.jpg
20200402_204058.jpg
 
Be carefull with that.
Lowering reduces spring rate risking bottoming out.
Lower ball joints are not cheap for our cars and lowering adds unwanted stress on them
Also an alignment is required.
Camber and toe is changed when lowered.

I just raised it back up, just enough to let the tires tuck slightly.

I am not driving this car yet, other than down the driveway and to the garage. Feeling things out, where I want to be, ect. It was way too low...

I will definitely be getting new tires all the way around and have it re-aligned to compensate to the drop.

20200408_183339.jpg
 
Gave her some plugs and wires, no more popping/backfires.
 
Still smokes under the hood...not sure if its exhaust manifold gaskets, or burning off from sitting so long....or both?



20200408_145237.jpg
 
Back
Top