413 engine

[Randy Stoner]

Was wondering if there is much demand for 413"s out there. Looking at a block with 516 heads. I would guess a 4.320 bore would get standard 440 pistons. Thanks for any information.

 

[Big_John]

I would guess a 4.320 bore would get standard 440 pistons.

413 bore is 4.1875".

440 pistons will not work.

 

[Randy Stoner]

Thanks you are right. I didn't do my math correctly.

 

[furious70]

IMO very little demand. If the crank is standard there's some value as its same as 440 as long as it's not the industrial 8 bolt
A few people use them for max wedge clones
They can be bored to 426 wedge