It's a Manikin and I have no idea, Maybe, they didn't seem to notice it.........atleast not as much as the guy who showed up driving a GM truck with a Chrysler motor in the bed.
Nick
'69 Fury III Convertible Build Thread- Project IVY
- Thread starter '69FuryIIIConvertible
- Start date
Nick
commando1
Old Man with a Hat
Ummmmmmmmm. Wait a minute here, son.....
bluefury361
Old Man with a Hat
I'm not sure how I would respond if someone asked me if it would be ok to pull in for a pee and a picture.......?
I asked if I could take a leak first, then the picture. He was working in the field.QUOTE]
Thanks for clearing that up....hyes:
commando1
Old Man with a Hat
Yah, but was the pic necessary?
Too bad I didn't take a picture of the nasty slice on my finger thanks to the "New" 318, maybe pictures of me out tracing my route home looking for the pin that fell out of my engine hoist.
Nick ;)
Nick ;)
commando1
Old Man with a Hat
Walk it off. Down the road that scar will have a story....
cm23uoc
Old Man with a Hat
- Joined
- Feb 13, 2011
- Messages
- 8,368
- Reaction score
- 3,448
Probably the best you can pick up with a Falcon.
I still got it greasy and washed it a few times, bandaids are for sissies...........
Actually.................Johns on wife #3 or 4 if I remember right.
I started to type but all I could think of was http://m.youtube.com/watch?v=GIL9srAp_Oo&desktop_uri=/watch?v=GIL9srAp_Oo
:laughing4:
He's not the only one with a few of those t-shirts. Maybe his new blonde friend is the way to go. You don't have to keep buying half your house if you split up with one of them.
Actually back in June John bit the bullet again, very happy this time.
Nick
she likes him, his cars, his friends and his hobbies.
Waiting for a combination of time and money to meet, also had a family member end up in the hospital.
Nick
Nick
Found some time this evening, being anal has it's upsides, I did find a few things needing attention, stem seals are shot (which means the valves need cleaned and the seats), someone had nearly entirely blocked a coolant passage with RTV when the intake was reinstalled, and there's overspray on the push rods (thats a case of extreme analness, but.....)
New timing chain (double roller, Billet steel sprockets) and Gasket set (with stem seals) on there was as of friday.
Nick
New timing chain (double roller, Billet steel sprockets) and Gasket set (with stem seals) on there was as of friday.
Nick
More work, cleaned up the pistons a bit, it HAS had a recent rebuild, the cylinder walls were too clean to be original, and according to the diameter of the pistons the chamber walls were only honed not bored.
commando1
Old Man with a Hat
cm23uoc
Old Man with a Hat
- Joined
- Feb 13, 2011
- Messages
- 8,368
- Reaction score
- 3,448
Could put on a 4 valve cylinder head. 
commando1
Old Man with a Hat
DOHC at that......
DOHC? Does this look like a Ford Modular V8 to you (Zing!)
Anyway, while I'm waiting on my crap from Summit I finally Visited my 18 foot friend (and after I left the washroom........)
Cleaned out my Garage (yeah thats what I call my plastic tent) and was able since we got rid of the Camper to extend my shop a bit, plenty of room.
Then I did some metal work, a few more hunks of steel and some time and I'll be done, well Done the floors and Gas Tank straps.
Anyway, while I'm waiting on my crap from Summit I finally Visited my 18 foot friend (and after I left the washroom........)
Cleaned out my Garage (yeah thats what I call my plastic tent) and was able since we got rid of the Camper to extend my shop a bit, plenty of room.
Then I did some metal work, a few more hunks of steel and some time and I'll be done, well Done the floors and Gas Tank straps.
Samplingman
Old Man with a Hat
Nice. Excellent how that bead rolling work turned out, looks original.
Similar threads
