Medina, a 1971 T-code Monaco

In post #374, @saforwardlook mentioned Chairman Lee's orientation on "better stuff". In the book of Iacocca's in the earlier 1980s, he mentioned that as a young Ford executive, he was taken into a meeting where they were discussing which shock absorbers to use in production. The choices were "a shock" that would last past the warranty period (of the time) and provide good service/value to the customer. The other choice was Ford's Rotunda brand of shocks, which were of better quality. The "a shock" cost about $1.00 each and the better Rotunda shock was about $2.00 or so, each. The ultimate choice was the "a shock" item.

Iacocca's manager could tell that he was not agreeing with their decision, so he said that they went with the less expensive item to: 1) save production cost on the vehicle as that part would last past about 12K miles and give the customer good service past that and 2) that when the shocks needed to be replaced, the customer would return to a Ford dealer for new shocks, thereby giving the dealer another chance to keep a loyal Ford customer in the process as the customer would then have the "better choice" of a quality Rotunda part. This was in about 1956 or so, IIRC, so you can also consider the side issues back then.

One side issue was that many customers who could afford it traded cars every 1-2 years, getting the "newest and best" available at that time. If the shocks really needed replacing, the dealer would foot the bill for new shocks (Rotunda or otherwise). Back then, Monroe actively advertised and advocated that owenrs should "get rid of their cheap factory shocks" and install (much better) Monroe shocks after about 12K miles. So customers who had relationships with good mechanics would head over there and request that they install new Monroe HD shocks on their Ford (or other make) vehicles.

Of course, if the customer special ordered "HD suspension" or "HD shocks" from the factory, they probably got the better Rotunda shocks, but paid the difference between the std and HD shocks on the MSRP of the vehicle as an "optional extra".

Just some thoughts,
CBODY67
 
@71Polara383 has done the maintenance on Medina and checked her in anticipation of the CATL 2023 run (Oil & filter change. Tire rotation. Fluids topped off. Fittings greased). Here are some photos that he took last week!

Resized_Resized_20230829_184614.jpg


Resized_Resized_20230829_184606.jpg


Resized_Resized_20230829_184724.jpg


Resized_Resized_20230829_184713.jpg


Resized_Resized_20230829_175208.jpg


Resized_Resized_20230829_175719.jpg


Resized_Resized_20230829_175650.jpg


Resized_Resized_20230829_175706.jpg


Resized_Resized_20230829_175351.jpg


Resized_Resized_20230829_180216.jpg
 
Beaufitul Monaco! Was wondering. Do C-body bucket seats easily reckline "on the go" ?
 
Beaufitul Monaco! Was wondering. Do C-body bucket seats easily reckline "on the go" ?
Power seats can be adjusted while moving. Manual buckets like Medina’s only adjust front/back.
 
Well now wait a holdit. Some C body seats do recline, based on model and options checked at time of order.
 
Well now wait a holdit. Some C body seats do recline, based on model and options checked at time of order.
Manual seats? I specified "like Medina's" -- as her seats do not recline -- but would love to hear more about reclining manual seats.
 
He asked if C body buckets recline .
Some do some don't. Your answer implies none do regardless of you throwing manual in there.
The answer is , yes, some do, some don't, mine do not. Welcome back Dave .. :thankyou:
 
Why is that F÷×+=<G stripe still on that car?????
Why!!!!!
As I have stated before, if the car gets repainted under my ownership, then she'll come out GY9 like the day she was born and without any stripe. Until that times comes, I've got better uses for my dollars; and, if I sell Medina before it is time, then the new owner can do whatever he (or she) wants.

FWIW, every single non-Mopar person who has made comments to me about the car likes the (non-Mopar) burgundy color and the (incorrect) stripe. I personally would prefer no stripe, but I don't see it when I drive. What I do see is the interior, and you'll notice that the front seats have been re-upholstered (no money was spared) in the correct pattern (thanks to @saforwardlook for sharing detailed pics with me of originals, so that my specialist could check his work) and vinyl.
 
if the car gets repainted under my ownership, then she'll come out GY9 like the day she was born and without any stripe.

Here's a hint of what's going on with Medina right now. Top photo outside, bottom photo outside. White and gold piece is fresh paint, behind is from Medina's original GY9. We have a match!

1731614873796.jpeg


1731614883556.jpeg
 
The next photo shows how close the match is. In front is the new paint, in the back is Medina's original paint. Note how much the new color travels -- it's like getting a gold and a green car for the price of one.

To quote the expert who picked the paint for me: "The new paint looks authentic, yet has more sparkle and shine because paint technology is different today. It's almost a perfect match looking head on in the sun. It does darken and lighten if you look from side to side. That's called "the flop". The old color doesn't have that flop due to the old tech tints they mixed with back then. So the color will change under different light. We can't avoid that but it is a very appealing look."

1731615014775.jpeg
 
Last edited:
Was Medina's valance never painted burgundy?
It was actually painted black (dunno why) but not under the rear bumper guards -- where the original GY9 was left in almost perfect condition (ignore the scratches in the photo below). Later on, the black was wiped off the valance with lacquer thinner -- revealing more of the original paint, as seen in the photos I posted earlier today.

PS: The underside of the trunk was never repainted, which provided additional ways to check.

1731617965540.png
 
Last edited:
Back
Top