New Member, New Polara

[Just Carbs]

View attachment 691679

View attachment 691680

View attachment 691681

OOPS, ALL BONDO.

AGAIN.

All made from the finest available angle iron from the second most convenient dumpster to hand. And then welded together by an indignant Ray Charles. **** me.

At least you finally get to see the snake that bit you.

 

[Stev]

The fun never ends. Made the rear fascia panel. Now that the rear tang is freed i'll locate it correctly by lining up the drilled out welds, then trim the fascia to suit. Everything is nice and level so far.

 

[Stev]

Much better. Came up about 1/2" total. Cleaner fit than when it came apart, frankly.

 

[3175375]

You are heading towards the home stretch now!

 

[Stev]

So after much measuring, getting the rear sill exactly level only moved the left side up by about 1/8", leaving much of the original weld holes exposed. Since I had to fab about half of the tub from scratch, it appears I mounted it slightly high.


Not ideal but little I can do about it now.