Does anyone know which fsm I should use on my 69 300 that was made Nov 68?
I have the 69 manual but I've pulled apart most of the wiring harness and the wires don't seem to match.
I started to trace and repair no backup lights. The 69 fsm shows the black and black w stripe from the trans to the fuse box. Good switch good ground, no lights. I pulled apart fuse box and it shows wires changed to white w/ white stripe inside fuse box. Fsm shows white going to purple wire at floor sill and purple wires go to back up lights. No circuit. Fsm shows purple wires change to white then go through fuse box. Simple circuit. Trying to trace two white wires, they go up into dash and I pulled dash and still haven't got to end of white wire. Fsm does not show all this.
Back up lights have good ground and work fine if I jump power to purple wire connector at drives kick panel.
I have the 69 manual but I've pulled apart most of the wiring harness and the wires don't seem to match.
I started to trace and repair no backup lights. The 69 fsm shows the black and black w stripe from the trans to the fuse box. Good switch good ground, no lights. I pulled apart fuse box and it shows wires changed to white w/ white stripe inside fuse box. Fsm shows white going to purple wire at floor sill and purple wires go to back up lights. No circuit. Fsm shows purple wires change to white then go through fuse box. Simple circuit. Trying to trace two white wires, they go up into dash and I pulled dash and still haven't got to end of white wire. Fsm does not show all this.
Back up lights have good ground and work fine if I jump power to purple wire connector at drives kick panel.
