New Member, New Polara

IMG_0798.JPG


IMG_0800.JPG


Alright, looks like the culprit is the wheel cylinders. Emptied the rear drum tank no problem, front one drained a bit but even with the bleeder fully off, nothing ever came out.

I still have some new ones from 2020's adventures, but how these spontaniously failed from sitting in the space of a week i have no idea. I still gotta do the parking brake cables so i guess i'm going to the 4 wheel drum brake jamboree tomorrow.

IMG_0797.JPG


While digging for them I found a NOS clock in the pile. I'm sure it probably works maybe.

Thanks grandpa.
 
View attachment 689364

View attachment 689365

Alright, looks like the culprit is the wheel cylinders. Emptied the rear drum tank no problem, front one drained a bit but even with the bleeder fully off, nothing ever came out.

I still have some new ones from 2020's adventures, but how these spontaniously failed from sitting in the space of a week i have no idea. I still gotta do the parking brake cables so i guess i'm going to the 4 wheel drum brake jamboree tomorrow.

View attachment 689367

While digging for them I found a NOS clock in the pile. I'm sure it probably works maybe.

Thanks grandpa.
There are quartz conversion kits for the clocks. I have converted 3 clocks of this period. Let me know if you need the source and I’ll dig it up.
 
Looks like a leaker

quite the opposite, nothing in, nothing out. Seized totally.

IMG_0820.jpg


Got the spindle rebuilt but the new bleeder is too long and hits the hub, not sure how to bleed it presently. It is of course smaller in diameter (!?) and does not interchange with the originals.

Cool.


I just hope the opposite side is ok, i'm not sure i have the space to disassemble the hub in that corner.
 
Last edited:
quite the opposite, nothing in, nothing out. Seized totally.

View attachment 689758

Got the spindle rebuilt but the new bleeder is too long and hits the hub, not sure how to bleed it presently. It is of course smaller in diameter (!?) and does not interchange with the originals.

Cool.


I just hope the opposite side is ok, i'm not sure i have the space to disassemble the hub in that corner.
@mobileparts …. (Craig) has your solution. No doubt!
 
Back
Top